ID Key: KBG-3

Availability: In existence

Parallel 18-channel receiver capabilities and beacon and SBAS (WAAS/EGNOS) support

Precise positioning – In addition to standard GPS and compensation via beacons, you can also access high-precision positioning data via SBAS (WAAS/EGNOS), even when you are out of beacon range. This sensor can be connected to the GTD-110/150 chartplotter, CVG-80/200 sounder chartplotter or K-Link system to enable precision DGPS navigation. Increasingly accurate positioning data will help you improve safety at sea and locate fishing spots.

18 Channel Receive – This sensor incorporates an 18 channel parallel receiver to enable fast and accurate positioning.

Automatic Station Selection – This sensor contains data on all beacon stations in the world, allowing it to automatically select the best beacon station at all times.
GPS receiver section

Reception frequency - 1575.42 MHz ± 1 MHz

Reception channel - Parallel 18 channels

Sensitivity - -130dBm

Accuracy

Position

GPS: 10m (2 drms, SA=OFF, PDOP≤3)
DGPS: 5m (2drms, SA=OFF, PDOP≤3)
SBAS: 8m (2drm, SA=OFF, PDOP≤3)
Speed

0.1kt (rms, SA=OFF, PDOP≤3)
Beacon receiver section

Reception frequency - 283.5 to 325.0 kHz

Sensitivity - 10 µV/m or less

Station Selection - Auto (position information required) or Manual

Beacon station data (for automatic station selection) - Automatic beacon almanac entry, integrated world station list

General

Power Supply - 10.8 to 31.2 VDC

Power consumption : 2.5 W or less

Data communication - Asynchronous data communication with RS-422

Resulting data

Format - NMEA 0183 Ver. 2.0 (NOTE: version 1.5 is available as an option)

Prayer - GGA, GLL, VTG, RMC, ZDA, GSA, GSV, MSS

Data level - RS-422

Output current - 20 mA or less